Signal
transmission
specifications |
DVI signal |
Complies with DVI Revision 1.0 and supports HDCP1.1 |
| Number of pixels supported |
SVGA to UXGA, WUXGA for display on PDP side: Full high definition supported (1080p) |
| Control signal |
RS-232C, transmission rate 9600 bps standard (two way) |
| Audio signal |
Stereo, input/output level:0.5 Vrms(maximum 2 Vrms) |
Electrical
specifications |
Rated voltage |
100-240 V AC |
| Rated frequency |
50/60Hz |
| Power consumption |
Optical DVI receiver board: Maximum 7 (W)
Optical DVI transmitter: Maximum 4 (W) |
External
dimensions |
Optical DVI receiver board |
104.5mm(W)×148.9mm(D)×38.5mm(H)
4.1inch(W) x 5.9inch(D) x 1.5inch(H) |
| Optical DVI transmitter |
210mm(W) x 110mm(D)×30.5mm(H)
8.3inch(W) x 4.3inch(D) x 1.2inch(H)
(excluding the protruding parts of the connectors and case legs) |
| AC adapter |
60mm(W)×90mm(D)×32.5mm(H)
2.4inch(W) x 3.5inch(D) x 1.3inch(H) |
| Weight |
Optical DVI receiver board |
230g / 7.42oz / 0.51lbs |
| Optical DVI transmitter |
665g / 21.46oz / 1.47lbs |
| AC adapter |
180g / 5.81oz / 0.40lbs |
| Laser Safety |
Class 1 Laser Product in IEC60825-1 |
Operating
environment |
Temperature |
0°C to 40°C / 32F to 104F |
| Humidity |
20% to 80% RH(with no condensation) |
Storage
environment |
Temperature |
-30°C to 60°C / -22F to -140F |
| Humidity |
Up to 90% RH(with no condensation) |
Cable
specifications |
Optical fiber cable |
4-wire with LC plugs at both ends, 30m to 1km / 98.43 ft to 3281ft |
| Link cable |
CAT-5e with RJ-45 plugs, 30m to 500m / 98.43 ft to 1640 ft |
| DVI-D cable |
DVI-D(single link), 2m / 6.56 ft |
| Control cable |
RS-232C, D-sub 9 pin plugs (female/ female),2m / 6.56 ft |
| Audio cable |
Stereo with mini plugs (Ø3.5), 2m / 6.56 ft |
|
* Parts of this specification and figure are subject to change without prior notice.